User guide
- Getting started
- PawnIO: the sensor driver
- Tapping and clicking
- The live page, panel by panel
- The other pages
- Alerts: why a panel blinks
- The event log
- Frames per second and "not a game"
- Power and electricity cost
- Dimming
- Audio latency check
- Check my PC: send a hardware report
- Settings
- Where things are kept
- Questions
Getting started
After installing, Sanity H.U.D. opens full-screen on your widest screen and starts every time you sign in to Windows. It runs as administrator because reading hardware sensors needs it, so Windows starts it through a scheduled task and you won't see an admin prompt each time.
- Wrong screen? Right-click it and choose Move to next screen until it's on the right one. Auto-pick the wide screen goes back to choosing by itself.
- Close it: right-click → Exit. Start it again from the Start menu.
- It also has a small icon in the system tray (by the clock). Right-clicking it gives the same menu.
PawnIO: the sensor driver
PawnIO is a small, free, digitally signed Windows driver made by a separate developer. Some readings live deep inside the processor and the motherboard's sensor chip, and Windows doesn't let normal programs read them. PawnIO is the safe, signed way in. Other hardware monitors use it too.
What needs PawnIO
| Needs PawnIO | Works without it |
|---|---|
|
|
Install it
- Go to PawnIO's official site, pawnio.eu, and click Download Now.
- Run
PawnIO_setup.exeand click Yes at the admin prompt. Keep the normal (signed) edition; don't pick "Unrestricted". - Sign out of Windows and back in, or restart the PC. Sanity H.U.D. only looks for sensors when it starts.
Check it's working
Look at the bottom line of panel 05 (right-hand panel):
| It says | Meaning |
|---|---|
| PAWNIO 2.x (grey) | Installed and running. All good. |
| CHECKING… | The first few seconds after Sanity H.U.D. starts. Wait a moment. |
| PAWNIO NOT INSTALLED | Install it (steps above). |
| PAWNIO NOT RUNNING | It's installed but Windows hasn't started it. Restart the PC; if it's still not running, reinstall PawnIO. |
| PAWNIO UPDATE 2.x | A newer PawnIO is out. Right-click Sanity H.U.D. → Get the PawnIO update…, install it, then sign out and back in. |
Alerts and new event-log entries take over that line while there are any; PawnIO's status comes back when they're gone. To remove PawnIO later: Windows Settings → Apps → Installed apps → PawnIO → Uninstall.
Tapping and clicking
Most bar screens are touch screens. A tap and a left mouse click do the same thing.
| Tap / left-click | Goes to the next page: live → detail → game history → trends → event log → live. Every page goes back to the live page by itself after 60 seconds. |
|---|---|
| Tap a blinking panel | Opens the Alerts page, which says why it's blinking. |
| Tap panel 03 (game) | Jumps straight to the game history. |
| Tap the processor or graphics panel | Opens the detail page with that part lit up for a few seconds. |
| Tap the bottom of panel 05 | Opens the event log. |
| Right-click | The menu: temperatures in °F or °C, screens, reports, settings, exit. |
The live page, panel by panel
The gauge is total CPU load. Beside it: clock speed, temperature, power and core voltage. Below are a bar for every thread and a 90-second graph of load (cyan) and temperature (amber).
Load gauge, temperature shown as core / hotspot (the hotspot is the hottest point inside the chip), core and memory clocks, power against the card's limit, video memory, fans, video encoder/decoder use, and LIMIT, which says what's holding the card back: IDLE, POWER, THERMAL or nothing. NVIDIA cards only for now.
The program in front: its frames per second, the 1% low (the slowest 1% of frames, which is where stutter shows) and frame time. While music plays it shows the song. Below that are your motherboard fans and temperatures.
Memory in use and commit (memory Windows has promised to programs, including the page file). For each drive: free space, read and write speed, temperature, % worn (how much of its rated writing it has used), lifetime data written, and which program wrote the most to it today. A ▲ marks a program writing to it right now.
Clock, date and uptime; network speed with a graph; estimated power use and today's cost; the two busiest programs; then a Windows line (updates waiting, restart needed, Defender and its last scan) and a status line. The status line shows active alerts, new event-log entries, or the PawnIO driver's status.
Temperatures show in °F. Right-click → Show temperatures in °C to switch.
The other pages
Detail
Everything the sensors report: per-core clocks and power, every CPU temperature and voltage, memory and bus clocks, all motherboard temperatures, voltages (including the CMOS battery) and fan headers, and the graphics card's full set of temperatures, clocks, power and PCIe traffic.
Game history
Every game you played for at least a minute, newest first: how long, average FPS, 1% low (amber when it shows stutter), and peak CPU, graphics and hotspot temperatures. Totals per game and for the last 7 days are at the bottom. Alt-tabbing out for less than a minute doesn't split a session.
Trends
- Graphics hotspot over time. The hottest point of each session on a chart, with a verdict: STEADY, RISING or FALLING. A hotspot that creeps up week after week is the early sign of dust or dried-out thermal paste, and Sanity H.U.D. tells you when it's time to clean.
- FPS over time for one game (tap the right half for the next game). Dashed lines mark where the graphics driver or Windows changed, and the headline says whether the game got smoother or slower since then.
Event log
See the event log below.
Alerts: why a panel blinks
A panel pulses amber (worth a look) or red (serious) when something needs you, and shows a TAP FOR WHY tab. Tap it to open the Alerts page: one card per alert with what's wrong, why, and what to do. Dismiss stops the blinking (CLEAR ALL dismisses them all).
Dismissing doesn't hide trouble for good:
- Ongoing problems (temperatures, low space, a stopped fan, memory, Defender off) come back after they've been clear for 5 minutes and then happen again.
- Logged errors (hardware errors, disk errors, an unexpected shutdown, a blue screen) come back only when a new one happens.
What can raise an alert: CPU, graphics, hotspot or drive temperature; the graphics card slowing itself down from heat; a fan that stopped; memory or commit at 90% or more; a drive under 10% free; a drive reporting it's unhealthy or 80%+ worn; hardware (WHEA) errors; disk errors on internal drives; an unexpected shutdown; a blue screen; Defender real-time protection off or its definitions over 3 days old; the PawnIO driver not running.
The event log
Windows keeps a log of errors, and a normal PC logs dozens every day that don't matter. The event log page shows the last 24 hours with that noise filtered out, repeats grouped together ("APP CRASHED: … ×19"), and each one in plain English.
- Tap a row to read What it means and Should I care?
- Colours: red = serious, amber = worth a look, grey = probably harmless.
- Hide this keeps that kind off the list. Unhide all brings them back.
- When something new is logged, panel 05's status line says n NEW EVENTS · TAP.
- Nothing on this page blinks. Only a blue screen also raises an alert.
Frames per second and "not a game"
Sanity H.U.D. measures FPS with Intel PresentMon, which watches Windows' own graphics events. It doesn't inject anything
into games. It measures whatever program is in front, so browsers, video players and the like show FPS too. Those are
on a not a game list: panel 03 says NOT A GAME with the program's name, and they're never saved to your game
history. Add or remove programs with not_games in settings.
Power and electricity cost
PC POWER is an estimate: the processor's and graphics card's own power readings plus a fixed amount for everything
else (power_other_w, 45 W). It's not a wall-socket meter, but it's close enough to see what gaming costs.
Today's kWh and cost are kept through restarts. Set your price per kWh with power_rate. For a time-of-use
plan, set power_peak_rate and power_peak_hours; "· PEAK" shows beside the cost while the peak
rate applies.
Dimming
Right-click → Dim when I'm away to choose: Off, or after 5, 10, 15, 30 or 60 minutes, and switch Also dim at night on or off. By default the panel dims to 15% after 10 minutes without mouse, keyboard or touch, and to 40% at night (10 PM to 7 AM). Moving the mouse or tapping the screen brings it back, an alert always lifts it, and it never idle-dims while a game is in front (a game controller doesn't count as input to Windows). All of these can be changed in settings.
Audio latency check
For music makers and anyone with crackling audio: right-click → Run audio latency check (60 s). For a minute, Sanity H.U.D. times the urgent driver work that can interrupt audio and names the driver responsible for the longest delay. Under 500 µs is GOOD, 500–1000 is WATCH, over 1000 is a PROBLEM. Right-click → Show latency report for the full report.
Check my PC: send a hardware report
Something blank, wrong, or a screen that doesn't fit? Right-click Sanity H.U.D. → Check my PC / send a hardware report…. Sanity H.U.D. puts together a report about your PC and shows it to you before anything is sent:
- Your hardware: Windows version, processor, graphics card and driver, motherboard and BIOS, memory, drives, screens, and whether PawnIO and common monitoring/RGB apps are present.
- What Sanity H.U.D. reads: every sensor it found, with its current value.
- What it couldn't read: for example "CPU temperature: blank" or "screen is 1920×440, stretched". This is what tells us what to fix.
Add a note about what looks wrong, then click Save to Desktop. Sanity H.U.D. saves the report as a text file and opens the folder. E-mail that file to support@massinsanity.com from your own e-mail. The report never includes your files, passwords, browsing, IP or MAC addresses, user name, PC name or serial numbers. Sanity H.U.D. never sends it itself. See the privacy section.
Settings
Right-click → Open settings.ini, edit, save, then right-click → Reload settings. Each setting has a comment above it. The useful ones:
| Setting | Default | What it does |
|---|---|---|
temp_unit | F | Show temperatures in F or C. |
cpu_warn / cpu_hot | 75 / 88 | CPU alert limits, always in °C. |
gpu_warn / gpu_hot | 75 / 85 | Graphics card limits, °C. |
gpu_hotspot_warn / _hot | 95 / 105 | Graphics hotspot limits, °C. |
disk_warn / disk_hot | 55 / 65 | Drive temperature limits, °C. |
free_warn_pct | 10 | Drive free-space warning, in %. Red below half of it. |
power_rate | 0.16 | Your electricity price per kWh. |
power_peak_rate, power_peak_hours | 0, 16-19 | Time-of-use plans. 0 = one flat rate. |
dim_night, dim_idle | 40, 15 | Brightness % at night and when idle. |
detail_return_sec | 60 | Seconds before a page goes back to live. 0 = stays. |
not_games | browsers, players… | Programs that show FPS but aren't logged as games. |
fan.Fan #1=CPU FAN | Rename a fan or temperature, or hide it with -.
The sensor names are in right-click → Open sensor list. |
Where things are kept
Everything is in C:\Program Files\MI-SanityHUD: settings.ini, your history in
data\ (game sessions, daily power and drive writes, dismissed alerts) and reports in diag\
(sensor list, hardware error log, latency report, drive writers). Nothing leaves your PC.
Questions
CPU temperature, VCORE or fans are blank, or CPU power says 0 W.
PawnIO isn't installed or isn't running. See PawnIO: the sensor driver. If it says PAWNIO 2.x and something is still blank, your motherboard may name its sensors differently: send us the sensor list (last question below).
Fan speeds jump around or read 0 even with PawnIO.
Fan-control and RGB programs (motherboard utilities such as Armoury Crate, iCUE and similar) talk to the same sensor chip and can get in each other's way. Try closing the other program to see if the readings settle. Some fans also stop on purpose when the PC is cool.
I tap the little screen but it clicks on my main monitor.
Windows has mapped your touch panel to the wrong screen. This is common with a second touch screen and takes a minute to fix:
- Press Win + R, type
control tabletpcand press Enter (Tablet PC Settings). - On the Display tab, click Setup…, then choose Touch input.
- A white screen with instructions appears on one monitor at a time. On your main screen, press Enter to skip it. When the instructions appear on the little screen, tap it.
- Press Enter on any screens left. Touches now land on the little screen.
Which screen does it use?
The widest one Windows knows about, if it's at least three times wider than tall. Otherwise right-click → Move to next screen. Make sure Windows shows the little screen as Extend these displays, not Duplicate, in Settings → System → Display.
Will it get me banned in online games?
Sanity H.U.D. doesn't touch games: it reads Windows' own graphics events and hardware sensors from outside. We haven't heard of a problem, but we can't promise every anti-cheat system will always be happy with every program on your PC. See the terms.
Does it slow my PC down?
Very little. It redraws 10 times a second and reads sensors once a second. Lower fps in settings if you
want it lighter still.
Windows said "Windows protected your PC".
That's Windows SmartScreen. It warns about programs that aren't digitally signed yet. Click More info → Run anyway. You can check your download against the SHA-256 on the download page.
My graphics card is AMD or Intel.
The graphics panel is NVIDIA-only for now. Everything else works, including FPS.
Can I use a bigger or different-shaped screen?
Yes, but it's designed for 1920×480 and other sizes are stretched to fit. Use right-click → Move to next screen to put it on any screen.
Something looks wrong on my PC.
Send us a hardware report from inside Sanity H.U.D. (see Check my PC) and describe what looks wrong in the note. Or e-mail support@massinsanity.com with a photo of the screen.